48 Cavity PET Preform Injection Molding Systems

48 Cavity PET Preform Injection Molding Systems

Click here for details.

48 Cavity PET Preform Injection Molding Systems,Two Screw,Rebot+Cooling,9S

Product ID: DMK-PET48A

Send Inquiry
Demark 48 cavities pet preform injection molding system@(injection moulding system@injection molding machine@injection moulding machine@) uses a new part cooling and handling system, which features:
1. Cooling on the inner surface of the preform without using compressed air, unlike most post-mold cooling systems which only cool the outer surface
2. Optimized cycle utilization — being mounted on the moving platen, the cooling system remains active for up to 85% of the overall cycle.

Demark pet preform injection molding systems are available from 280 to 500 tonnes (2800 to 5000 kN) and up to 72 cavities.

Demark pet injection systems offer:
1. Faster cycles(10s)
2. Reduced energy consumption
3. Smaller footprint
4. Improved repeatability
5. Rapid set-up

Features:
1. Two state plasticizing enables plenty injection quantity;
2. Take out plate with three working position insures sufficient cooling time and shorter cycle time;
3. High quality parts and accessories from world famous brands enable higher speed and precision;
4. Special screw design increases torque while brings down shear force to avoid degradation;
5. Accumulator from world reputable manufacture increases performance while brings down power consumption;

Reflex Platens
Reflex platens distribute clamp force evenly across the platen face.
Reflex platens:
1. Allow for 10-30% lower clamp tonnage
2. Decrease mold wear
3. Improve part quality

Injection Units
demark systems offer both reciprocating screw (RS) and two-stage injection units. RS units offer the performance required for many PET applications while two-stage is appropriate for higher throughput applications.

Polaris Controls
PC-based controls manage all functions of our PET production systems, with optional packages to integrate auxiliaries and downstream part handling equipment. Advantages include:
1. Faster cycle times
2. Improved shot-to-shot repeatability
3. Remote connectivity through ServiceNetLink
4. Control of molding system and auxiliaries from a single interface

Linear Bearings
Linear bearings support the moving platen directly on the machine base. This design reduces mold wear by improving platen alignment and perpendicularity, and provides a grease free molding environment.
TYPE DMK-PET48A DMK-PET48B
INJECTION UNIT Screw L/D Ratio (L/D) 25 25
Injection Pressure (Kgf/CM²) 875 875
Machine Size(LxWxH) (mm) 9100X3790X2240 9100X3790X2240
Theory Shot Volume(Max) (㎝) 1815 2905
Shot Weight(PS) (g) 2178 3486
Shot Weight(PS) (ozs) 77 123
CLAMPING UNIT Clamping Force (T) 360 360
Clamping Stroke (mm) 645 645
Max/Min Thickness of Mould (mm) 300~720 300~720
Space Between Tie Bars (WxH) (mm) 660X860 660X860
Ejector Stroke (mm) 180 180
Ejector Force (T) 12 12
NO.of Ejector Pins (pcs) 5 5
Max Pressure of System Kg/CM² 140 140
INJECTION MOULD Cavity(Max) (PCS) 48 48
Neck of Bottle(Max) (mm) 42 42
Length of Preform(Max) (mm) 190 190
Weight of Preform(Max) (g) 35 45
Form of Mould Pneumatic pin-valve gate hot-runner Pneumatic pin-valve gate hot-runner
POWER UNIT Pump Motor Power (KW) 82 82
Robot Power (KW) 12 12
No.of Heater Zones(0~400°C) 49+10 49+10
Heater Input Capacity(kw) 53 58
Mould Heater Capacity(kw) 51 51
Auto Manipulator Manipulator(cav) 144 144
Cooling Form(cav) 144 144
OTHER REQUEST Electric Power supply(3-phase AC)(v) 380 380
Electric Power supply(3-phase AC)(kw) 155 155
Chilling Water(degree) 5-15 5-15
Chilling Water(Mpa) 0.45 0.45
Chilling Water(L/min) 600 600
Cooling Water(degree) 30~55 30-55
Cooling Water(Mpa) 0.25 0.25
Cooling Water(L/min) 200 200
Compressed Air(Mpa) 0.7-0.9 0.7-0.9
Compressed Air(L/min) 800 800
Compressed Air (Max) Pcs/h 17000 17000
Certificate
  • CE
  • TUV
  • ISO9001

Main Products

Pet Stretch Blow Molding Machine, Pet Preform Mold/Mould, Bottle Blowing Machines, Pet Preform Injection Molding Machine/System, Cap Mold, Cap Mould or Closure Mold, Closure Mould, Lid Mold, Lid Mould

Contact Detail